House Plans for Ontario: Start From a Plan, Build What You Need
Our online plans give you a proven starting point for a home, cottage, addition or timber frame in Ontario. Every plan can be adapted by our team to your lot, the Ontario Building Code and your septic and site conditions, then engineered and taken through the building permit.
By Andrew Melchers, P.Eng., President and Principal Engineer, INEAS
Featured Plans
A few of the homes, cottages and timber frames in the library. Open any plan to see the full drawings.
Can I Use a Stock Plan for a Building Permit in Ontario?
Usually not as is. An Ontario building permit application needs drawings that fit your actual property: the site plan, setbacks and zoning, foundation and soil conditions, septic and well where you are off municipal services, and energy efficiency compliance under the 2024 Ontario Building Code (O. Reg. 163/24). The drawings must also be prepared by a qualified designer (BCIN), architect or engineer.
That is where a plan saves you time. You pick a layout you like, and we adapt it to your lot, prepare the permit and construction drawings, design the structure and septic where needed, and coordinate the permit with your municipality.
How It Works
- Pick a plan. Browse the plans and choose the one closest to what you want.
- Tell us about your lot. Send us the plan number, your property address and what you would change.
- We customize, engineer and permit it. Our designers and engineers adapt the plan, seal the drawings and take it through the building permit.
When a Fully Custom Home Makes More Sense
If you are building on a waterfront, rural or sloped lot, want timber framing or log construction, or have a clear picture of a home that no stock plan matches, a custom design will serve you better than changing a plan room by room. Our design team designs custom homes with engineering in-house, from first sketch to permit and construction drawings.
How to use a pre-design plan to start a custom home · See our custom home design work on indesigns.ca
Where We Work
We design for clients across Ontario from our office in Brockville, with most custom homes in Eastern Ontario: Brockville, Kingston, Ottawa, Gananoque and the Thousand Islands, Smiths Falls and Prince Edward County. Call 613-498-3508 or send us your project details. We aim to respond promptly.